Skip to content

Servicing regional VIC and Southern NSW

AmbaGuard
Menu

Electrical safety, Echuca and Moama

RCD Testing in Echuca

Safety switch testing for Echuca and Moama workplaces, from riverfront venues to workshops and schools. Every RCD timed, recorded and reported, with failures flagged on the spot.

Book RCD testing0407 877 482

Water and power need a working RCD

Commercial kitchens, wash bays, outdoor areas and anything near the river put electrical gear close to water. That is where an RCD earns its keep, cutting power before a fault can do real harm.

We give every RCD a push-button test and a timed trip test, then record the result so it can be compared next time. Sites in Moama and Southern NSW are covered on the same run as Echuca.

What We Check on Every RCD

Switchboard safety switches and portable RCDs both get tested. An RCD that looks fine and does not trip is worse than none, because everyone thinks they are covered.

Push-button test

The test button confirms the RCD mechanism trips and cuts power. It is the quick check, but it does not tell you how fast.

Timed trip test

With an RCD tester we put a measured fault on the circuit and time the trip. A standard 30 mA RCD should cut power within 300 milliseconds.

Switchboard RCDs

Fixed safety switches in your switchboard are tested and labelled, and we note which circuits each one protects.

Portable RCDs

Plug-in and lead-mounted RCDs used on tools and outdoor gear are tested and tagged along with the rest of your portable equipment.

Compare past results

We record every trip time, so we can compare this visit with the last one. A unit getting slower is often on its way out.

Report and follow up

Results go into your report. If an RCD fails or is borderline, we tell you so a licensed electrician can replace it.

How Often RCDs Are Tested

Intervals depend on the type of RCD and where it is used. Construction sites and other tough environments are tested more often. We set the schedule for your site and remind you when it is due.

  1. Push-button test

    Regularly, often every three to six months, to confirm the RCD still trips.

  2. Timed trip test

    At least yearly in most workplaces, measuring how fast each RCD cuts the power.

  3. After a fault or trip

    If an RCD keeps tripping or will not reset, get it checked before relying on it again.

Between Tests

A few habits that keep your safety switches doing their job.

  • Know where your switchboard is and which RCDs protect which circuits.
  • Use a portable RCD with power tools and outdoor gear when the outlet is not protected.
  • If an RCD trips, find the cause before resetting it. Do not keep resetting it.
  • Do not tape over or bypass an RCD that keeps tripping. Call us or an electrician.

Add to the same visit

One booking, one report.

All services

How a Service Works

Book a service

Book a Time

Call or send a request. We book a visit that suits your hours and work around your team.

We Test On Site

Every extinguisher, light, appliance and kit checked and tagged. Problems are pointed out while we are there.

Report and Reminder

You get a written report, and we contact you before the next service falls due.

Echuca and Both Sides of the Murray

From our base in Kyabram we test RCDs for workplaces in Echuca, Moama, Rochester and Deniliquin.

  • Echuca
  • Moama
  • Rochester
  • Kyabram
  • Deniliquin

Also in: Kyabram, Shepparton

Book RCD testing

What Our Clients Say

“Love working with Paul and Melissa, who service two of our sites. Are happy to work in with our schedules and provide an efficient and thorough service.”

Leanne WilsonElgas Limited

“Our business used Melissa and Paul for supply, testing and maintenance of fire safety equipment and first aid supplies, as well as conducting test and tag. We found them to be very reliable and attentive, with friendly and welcoming customer service. Highly recommend their service.”

Steve DumsdayGoogle review

“Making the switch to Melissa & Paul has been a great benefit for my business. They organise everything for me, one less thing for me to worry about, that’s for sure. They ensure I am compliant at all times and offer a vast range of services and advice.”

Travis KennedyDahlsens Building Centres

“Excellent and professional service and great communication. We have used them for many years at the school where I work. Would highly recommend.”

Kristy WoodsGoogle review

“…All services are provided to a very high standard in a timely manner and allows our organisation to meet our accreditation standards. A wonderful family owned business providing excellent customer service to our small community based organisation in rural New South Wales.”

Sue JackomosViney Morgan

“Great company to deal with, efficient and reliable. Great Team and use them regularly.”

Integral TrainingGoogle review

“I have been dealing with Paul and his team now for over 5 years. I have always found them to be very professional and thorough in all they do. …He does everything he can to minimise the impact on our normal work routines.”

John WilsonWestern Composting Technology

“Excellent service. Would highly recommend. A+++”

Vinyl Records AustraliaGoogle review

“Paul does a great job.”

Jodie ElliottGoogle review

RCD testing FAQs

Common questions from Echuca and Moama sites. Anything else, just ask.

Book a service

Do you test RCDs in Moama?

Yes. We test RCDs for sites in Moama and Deniliquin as well as Echuca, and can do it on the same visit as test and tag or fire equipment.

How long does RCD testing take for an Echuca business?

Each RCD only takes a few minutes. A small business is usually done quickly, and bigger sites are worked through board by board so the power is only off briefly.

What is the difference between an RCD and a circuit breaker?

A circuit breaker protects the wiring from overloads. An RCD (often called a safety switch) protects people, by cutting power fast when current leaks to earth, like through someone touching a live part.

Can I just press the test button myself?

Pressing the button is a good habit and tells you the RCD trips. It does not tell you how quickly. A timed trip test with an RCD tester is the only way to confirm it trips fast enough to protect someone.

What happens if an RCD fails?

We note it in your report and let you know on the day. Fixed switchboard RCDs need replacing by a licensed electrician. Faulty portable RCDs are tagged out of service.

Can you test RCDs on the same visit as test and tag?

Yes, and most sites do. RCD testing, test and tag, fire equipment and emergency lighting can all be done in one visit with one report.

Safety Checked.
Box Ticked.

Tell us what you have on site and we will come back to you with a time and a clear quote. Prefer to talk? Call Paul.

Book a service

Fields marked * are required.

Book a service

Tell us what you need and we will come back to you with a time. Prefer to talk? Call 0407 877 482.